How to Remove an Audi A6 Rear Bumper

1. Park the car on level ground. Engage the parking brake and disconnect the negative battery cable.
2. Open the trunk and remove the corner side panel trim from the rear of the vehicle. Disconnect the wiring modules from the tail lights. Remove the assemblies from the vehicle to access the rear bumper mounting screws.
3. Remove the two screws mounting the bumper cover on each side. Disconnect the electrical module for the backup sensors (if equipped) located on the drivers side, below the tail light assembly cavity.
4. Remove the lower mounts below the rear bumper. Detach the clips from each side of the bumper.
5. Support the bumper on one side and have an assistant support the other side. Pop the bumper cover off. Be careful not to damage the clips.