Highlighting VAZ 2107 with his own hands

In order that would give the car dashboard VAZ 2107, a bright and beautiful, we decided to make the blue lights of the dashboard. What would make a beautiful lighting was done by the LED board to be installed in place of a standard backlight, so that would be all rose beautifully and accurately is necessary to modify the scale of the instrument panel. That would combine the instrument scale can be set in white LEDs, which have good brightness and replace the standard bulbs. Installing a blue backlight for the dashboard requires 6 LEDs and 6 resistors, which will have a resistance of not less than 850 ohms and 5 white LEDs of high brightness. All LEDs must be installed first in the cartridge, and then in the dash. The second step will be removing panels and visor, do not forget to remember the position of the hands of devices. Using a thin knife to gently peel the standard box from the LED, and then gently wipe off the green filter. Will look bad and white lights, but to achieve a beautiful sports atmosphere will make the blue. You will have to very carefully and neatly glued blue film with tweezers. Cut out all the necessary parts of the film and rovnenko decompose, it is easy to stick to the adhesive paste. After fixing the film is better to check the glow and if you are satisfied proceed to the assembly. Do not forget for the arrows, they should not be displaced. Do highlight dl SAUO. Standard LED should be replaced by tekstolitnuyu panel with blue LED, and red patches to install red LEDs. What would be the light blue and red LEDs strongly blended can set the partition between the sectors. In order that would make uniform illumination attach to the base lid foil. This will help make the glow of the dashboard more smooth and bright. This blue light will help make the dashboard of the car VAZ 2107, a rich and beautiful at night, which would give the car greater reliability. Standard instrumentation and lighting VAZ 2107 looks quite plain and dull, at night to look at it quite pleasant. Lighting, made their own hands will cause you a sense of dignity to yourself and your car. Before proceeding with the work necessary to prepare everything carefully and think out a plan of action, in which case your work will be faster and better. Get a quality LED, checking them carefully before using, buy a blue film, good glue, as well as prepare the tools that you may need to install your lighting. You will need a thin stationery knife, tweezers, and preferably two, and possibly a drill with a drill. Prepare all necessary materials and tools you can start working on installing a blue LED light on your vases 2107.

Car repairs with their own hands

The modern car - mechanically complex device, stuffed with various electronics, and at first glance, to be thrust under the hood with a wrench himself - hopeless task. However, not all so sad. There are a number of works that are able to run any car owner who can distinguish the spanners from carob and understanding in what direction to unscrew the nut. All the car break down can be divided into two main groups - failures caused due to problems with electronic filling your car and damage associated with mechanical malfunction of components and assemblies. In the first case without the services of a qualified person can not do - repair of automotive electronics is simply impossible without computer troubleshooting. But in the latter case, much can be done independently. If a fault occurs in the first place you need to determine which of the units of the automobile is out of order. Then, after an accurate diagnosis, there are two ways to repair - give the car for a hundred or remove the faulty unit and give yourself a repair is not the whole machine, namely, the faulty node that will be significantly cheaper. What is the benefit? After all, for the work of removing and posleremontnoy install any unit in the workshop with you take the money, and often the cost of mounting and dismounting, such as CPR will be comparable to the cost of repair of the CAT! Why pay money for something that you are able to do and independently? In order to remove the broken node from the car, you'll need the room (garage, shed) from the observation well, a set of tools and a little patience. Very harmless for this to get a good technical description of your car (you can download and in the internet). Now let's go step by step: 1. Before removing the unit is not too lazy to carefully examine the upcoming scope of work, identify all the locking compound. Note the number and placement of threaded connections on your machine and in the manual may be small differences! 2. Unplug all members of the shooting site electrical connectors, hoses and cables. It should be done slowly, carefully remembering that where joined, pads for connector is colored tape mark or special colored markers to the assembly not confuse that to join. 3. Before you unscrew the unit to drain fluid from his technical (from PPC - oil, from the steering rack dekstron it.d.) 4. Unscrewing the retaining assembly bolts and nuts, do not be lazy neatly folded out of prefabricated containers, not throwing bolts in the garage! It often happens that the fastening bolt replaced if lost analog is not easy, but in case of repair of vehicles produced in the United States simply can not (the Americans are not metric and inch thread) 5. Filmed unit should be cleaned from oil, soot and dirt - perhaps you yourself will be able, after a careful examination to understand the cause and fix it without any problems. 6. If the problem on its own did not work, you need to decide where to sit in the repair of a broken node. Typically, specialized repair shops, say, starter / generator is enough in any city and you need to choose a phone shop, ready to undertake repairs on the conditions it would suit you. 7.

How to Make Your Own BMW

1. Point your web browser to www.bmwusa.com, and click the link at the upper right, and just below the Home button that invites you to Build Your Own.
2. On the Build Your Own homepage, select the model that you would like to build by clicking the hyperlinked model number. (Example, if you would like to build an X5 535d, go to the column marked X5 for the model, and select the link for the appropriate engine--in this case, the 3.5-liter diesel.
3. Once you have selected the appropriate model and engine, you will have arrived at the page which allows you to build your BMW. You are presented with a photo of the car, and the option to view the front or side, or the entire car in 360 degrees. You will also have the option to view the interior, toggling back and forth between side view and dash view. Across the top of the picture of the selected BMW there are multiple tabs that allow you to toggle back and forth between Exterior Color, Interior, Options, Packages, Accessories, and a Summary of the BMW that you have designed.
4. As you update your preferences in the tabs, to the far right you are able to see a constantly updated summary of the options that you have chosen as you add and subtract them, and the subsequent impact that they may have on the price of the vehicle. Once you have completed configuring your BMW, you are able to follow the links at the top of this column to save (you must create an account) or print your BMW as made by you.
5. Finally, once you have successfully configured your BMW, click the summary tab. The screen that loads will not only offer you a summary of your packages and options (as well as their associated costs), but will offer you a link at the bottom to explore financing and leasing options available through BMW if you are interested in taking the next step.