In order that would give the car dashboard VAZ 2107, a bright and beautiful, we decided to make the blue lights of the dashboard. What would make a beautiful lighting was done by the LED board to be installed in place of a standard backlight, so that would be all rose beautifully and accurately is necessary to modify the scale of the instrument panel. That would combine the instrument scale can be set in white LEDs, which have good brightness and replace the standard bulbs. Installing a blue backlight for the dashboard requires 6 LEDs and 6 resistors, which will have a resistance of not less than 850 ohms and 5 white LEDs of high brightness. All LEDs must be installed first in the cartridge, and then in the dash. The second step will be removing panels and visor, do not forget to remember the position of the hands of devices. Using a thin knife to gently peel the standard box from the LED, and then gently wipe off the green filter. Will look bad and white lights, but to achieve a beautiful sports atmosphere will make the blue. You will have to very carefully and neatly glued blue film with tweezers. Cut out all the necessary parts of the film and rovnenko decompose, it is easy to stick to the adhesive paste. After fixing the film is better to check the glow and if you are satisfied proceed to the assembly. Do not forget for the arrows, they should not be displaced. Do highlight dl SAUO. Standard LED should be replaced by tekstolitnuyu panel with blue LED, and red patches to install red LEDs. What would be the light blue and red LEDs strongly blended can set the partition between the sectors. In order that would make uniform illumination attach to the base lid foil. This will help make the glow of the dashboard more smooth and bright. This blue light will help make the dashboard of the car VAZ 2107, a rich and beautiful at night, which would give the car greater reliability. Standard instrumentation and lighting VAZ 2107 looks quite plain and dull, at night to look at it quite pleasant. Lighting, made their own hands will cause you a sense of dignity to yourself and your car. Before proceeding with the work necessary to prepare everything carefully and think out a plan of action, in which case your work will be faster and better. Get a quality LED, checking them carefully before using, buy a blue film, good glue, as well as prepare the tools that you may need to install your lighting. You will need a thin stationery knife, tweezers, and preferably two, and possibly a drill with a drill. Prepare all necessary materials and tools you can start working on installing a blue LED light on your vases 2107.
