Function and Choosing Right Oil For Car

FUNCTION OF OIL
In general we assume that the main function is as a lubricant engine oil. Though oil has another function that is not less important, namely, among others, as cooler, Patron of Rust, cleaners and Closing Gaps in the wall machine.

All these functions are very closely related, as lubricants, oil will create friction between the components in the engine move more subtle, making it easier for machines to achieve an ideal working temperature.
Additionally Oil also acts as a heat transfer fluid reaches the combustion chamber of 1000-1600 degrees Celsius to other parts of the engine cooler.

With the level of consistency, adjusted for volume and capacity needs of the machine. The more viscous oil, the level of leakage will be smaller, but the other resulted in increased workloads for the oil pump.
In addition, the content of additives in the oil, will make a film on the cylinder wall in order to protect the engine at the start. At the same time prevent rust, even if the vehicle is not used for a long time. Beside that also contain detergent additives in lubricants to function as a solvent for impurities result of burning residual oil turnover time is wasted.

CHOOSING OIL

Increasing number of oil options at this time, will certainly make us a little confused, because all the oil producers would say they are the best oil. But there are some things that might be used as a reference, among others, recognize the character of your vehicle, engine specification and which the majority of your driving environment (temperature, humidity, dust, etc..).

How to Replace a Mercedes Oil Pan Gasket

1. Place a drain pan under the drain plug on the oil pan. Open the drain plug with a socket and ratchet then drain the engine oil into the drain pan. Once the oil drains, replace the drain plug into the oil pan and tighten it with the socket.
2. Remove the bolts that secure the oil pan to the bottom of the engine block. Depending on the model of Mercedes you have, there could be as many as 18 to 24 bolts holding the pan to the engine.
3. Pull down on the oil pan to break the seal between the pan and the engine. If necessary, wedge a thin metal scraper between the pan and the engine block to break the seal.
4. Slide the pan forward and maneuver it around the oil pickup tube inside the oil pan mounted to the engine block.
5. Scrape the old gasket off the mating surfaces of the oil pan and the engine block with a metal scraper and a towel. The cleaner you get the two surfaces, the better chances you have of limiting oil leaks.
6. Place a bead of RTV gasket sealer onto the mating surface of the oil pan and allow it to cure for 20 minutes. Place the oil pan gasket on top of the RTV sealer then apply a second bead of RTV sealer on top of the gasket. Allow that bead to cure for 20 minutes before proceeding.
7. Slide the oil pan into place. Be careful not to touch the RTV sealer on any part of the engine while you maneuver the pan into place. Once in place, push the pan directly upward onto the engine and thread a bolt into each corner of the oil pan with your fingers. Only thumb-tighten the bolts.
8. Thread the remaining bolts into the oil pan using a criss-cross pattern. Only thumb-tighten the bolts. Allow the RTV sealer to cure for another 30 minutes before continuing.
9. Tighten the bolts with a socket and ratchet in a criss-cross pattern.
10. Open the oil fill cap on the engine valve cover and place a funnel into the hole. Pour 4 quarts of engine oil into the engine. Remove the funnel and close the cap.

How to Reset the Oil Change for a 2006 330i

1. Insert the key into the ignition, and press the Start/Stop button on the dashboard, located to the left of the vehicles steering wheel. Do not press the clutch or brake pedal when pressing the Start/Stop button.
2. Press the BC button located on the end of the turn signal lever to display the clock. Hold the odometer Reset button located on the dash cluster until the Oil Canister symbol appears on the dashboard display.
3. Press the Up/Down button located on the turn signal lever until the Oil Canister service item appears on the dashboard display.
4. Press the BC button twice to reset the oil reminder. A small Countdown Timer symbol will appear and disappear from the dash display after successfully resetting the oil change reminder. Hit the Start/Stop button to shut off the vehicle.